View Full Version : DVR-Studio HD
18.09.2009
DVR-Studio HD 1.56
The following has changed in version 1.56:
New: transmission grid and data rate of the film with rating.
It is now displayed in what time intervals a cut is possible. This is specified by the sender. Also, the data rate of the film is shown. Both values are marked with symbols that the quality assessment (thumbs up, sideways, downwards).
New: Drag and drop entire folders can now be inserted.
You can now drag an entire folder with a movie simply in the compilation.
New: Delete multiple crop areas at once.
Simply select all areas with an average multiple as with other files on Windows and delete with one click.
New: In error analysis will preview selected directly after the next error range.
After playing a fault location is then automatically selected the next point of failure. You just have to press play again.
New: Progress indicator in taskbar in% (in addition to a bar in Windows 7)
New: Reset the settings on startup means holding down the left Shift key.
The program would malfunction, it can be used for loading the default settings.
Mod: Adaptation Kathrein UFS 902/910 export to Firmware 2.01
Kathrein has increased from the Firmware 2.01 The following files to 4GB. When exporting with the device format you can now choose the new 4GB and 2GB old division. This is important if one wants to bring the film back to the receiver.
Fix: Positioning at Eurosport HD and some HD suisse
The select a location in the film resulted in some circumstances to ensure that the pointer has jumped to an entirely different place.
Fix: 4GB partition for PS3
For films with long GOPs did it happen that the maximum size is exceeded 4GB.
Fix: missing thumbnail images when opening shots
After the opening of a film has sometimes been the first preview image is not loaded.
Fix: Fix for SD M2TS possible (WebService)
Fix: some stations were not recognized (eg, Eurosport HD NL)
24.09.2009
The following has changed in version 1.58:
Fix: Cut areas have been partially ignored
The error led to discontinuation during the processing of the table with the previously defined cut areas.
Fix: Cut Preview gets stuck sometimes
Under certain circumstances, a call to the Preview section could not be processed.
Fix: Wraparound caught with illegal PTS
When wraparound, so resetting the time stamp, it seemed, had at this point, an invalid PTS resulted in an error.
Fix: "Phantom of error areas" for export functions
The temporary pointer jumped in circumstances after clicking on the start or EndCut to an undefined point in the timeline.
Convert Mod: jump to the agency before the next error "or" Ignore "
After playing the preview section to a fault, this jump has jumped to the next error. Now, only query that should be done with it.
Mod: Cut preview has priority over mistakes Preview
Located in a cutting area, an error position, a preview leading to the fault location to the runs on the crop area.
Have fun with DVR-Studio HD 1:58 ...
DVR-Studio HD 1.60
The following has changed in version 1.58:
New: Function "Demultiplexing"
Dividing the SD and HD recording in the elementary audio and video separately. These files are a starting point for authoring.
New: Generic Device export, configurable through web service
We can now set directly in the Web, like the recording of the various devices need to be treated. This information is available to the program without having to make an update, available immediately.
New: Batch processing of multiple
You can now several films in the collection basket and can work through. Simply paste all anselektieren. Batch processing works with all types of spending and the advertising and troubleshooting.
New: Filing a support request and test files
In case of problems can now set a specific point in the film and create a support request. These log files and computer information can be automatically inserted. Everything is put together with the test section on the desktop as a zip file. So everyone can see what is being submitted (for the data protection ... Wink). After this test file can be called again to verify that the problem so that we can emulate it. With just one click you can then load the Support Request to our server.
New unravel: Condensed shots back in subfiles
You can now also a summary file also dissolve into your individual files. This changes the button with the three letters that if we anselektiert an aggregated file.
Reassign: Thumbnails, Title and description of a recording
You can now create a description of each recording, and also insert an image from the film (location of the pointer) or via a file.
This data is used for the next authoring. With instrument to which we can create the control files, these data and images displayed in the receiver.
New: Read EPG files and mini-preview and generate (only for certain devices)
In all Vantage, NanoXX, Belsat, Hirschmann 2S-HD910, Kathrein UFS902, 910, we can now read out the text of the EPG receiver and his thumbnail, edit it and also output for export "device". The receiver displays this data as in the film and information in the recording sheet.
So the new function looks in the program:
[Only Registered Users Can See Links]
... and it shows the receiver Vantage, NanoXX, Belsat, Hirschmann 2S-to HD910:
[Only Registered Users Can See Links]
Fix: Kathrein Export: Incorrect runtime shown in the menu
The export in the Kathrein format film size is correctly displayed only after the recalculation by the receiver. The first time was showing only 1MB. This is now fixed.
Fix: Audio-order is now displayed using the PMT
Was reported in the forum. While we can change the order but when you re-load the TS into the program we see no change. This has been fixed now, exported in the order in which they also invite you to get back to the pure.
Fix: PCR was sometimes omitted (eg itv SD-Channel)
This led to asynchronicities and stuttering playback.
Fix: higher fault finding of the last PTS and PCR
Duration was not recognized correctly. Related to various stations.
Have fun with HD DVR-Studio 1.60 ....
DVR-Studio HD 1:61
Version 1.61
===================
Since this is only in the MSI file, you can not just install only "upward".
Please proceed as follows:
- Delete the 1.60 through the Control Panel> Software
- Run the MSI Setup 1.61
The following issues are resolved:
- Fix: In case of export were issued 0MB
- Fix: Blocking with troubleshooting if included in the film is a wraparound was.
- Fix: Fixed settings of Web services were not always updated. (Major problem in the forum)
But we have also included something new:
If you are included in full-screen a film takes place in the cut areas, they will be skipped.
But this is only the case in full screen mode. Not in the program mode.
I hope to have fixed in this version, the error of 1.60. For the trouble and inconvenience, I apologize to you.
DVR-Studio HD 1.63
The following has changed in version 1.60:
New: skip the cut areas while playing in full screen mode
Fix: Export 0MB been issued.
If we had sat at the intersection StartCut definitions at the beginning of the film, jumped on the issue of the progress bar equal to 100% and the output files were 0MB.
Fix: Blocking troubleshooting if included in the film is a wraparound was. When down in the recording, the timestamp from the sender to zero, this led to a problem in debugging,
Fix: Fixed settings of Web services were not always updated.
The recharge the receiver list did not work correctly under certain circumstances. Thus, export information to the receiver was not available.
Fix: program does not start under special circumstances.
If a faulty device list was available, this was not to reload the list of equipment carried out properly. In this case, the charge was already hanging in the HS logo.
Fix: Inserting crop areas between existing crop areas.
Insert a new crop area between two existing cross-section areas was not possible.
Thus, the new feature of the EPG looks like text editing and the determination of the preview image in the program:
(This function is a precursor of authoring, and is used for some receivers in the receiver to output format)
DVR-Studio HD 1.64
We have finished the new version 1.64 of DVR-Studio HD.
IMPORTANT: This version is not yet released on the update service and therefore particularly needs to be installed.
Please an old version of the Control Panel to uninstall first and then run the MSI setup.
The following has changed in version 1.60:
New: Traffic light system for equipment selection:
For each device there is now a traffic light signal:
RED
It is not possible a movie to bring the receiver back to
YELLOW
One can bring pictures of the receiver worked well back on the same device. In the old Topfield devices used to this, the old Haeder and devices with the control files. Be retained when using the old tax files, the name of the film. Some devices are the manuals available. Please list the equipment back on the link "HS Forum use" to obtain information about.
GREEN
It is produced by Studio HD DVR all the new files that are playing for the film to the receiver is necessary. It does not matter what device was from the movie.
QUESTION MARK
Such equipment is no information available. If anyone has this device, please try other devices just once from the same manufacturer or submit us a support request for device format.
New: Enhanced support request to the Device Export:
This question is not only obtained information about the device, but also to any control files, folder structures and overall file sizes and extensions automatically recorded. In addition, a short test file to detect Haeder is generated. All this is created on the desktop as a zip file and loaded via FTP to our server.
We hope to close quickly and so fast, "white spots" on the receiver map. Wink
New: Topfield 7700HCSI / 7000 HDPVR support
New: Topfield header for old equipment
It now supports all the Topfield.
For all devices TF4000 up TF6xxx there is the export-related devices (YELLOW). This means that images of Topfied run even after cutting back on the Topfield. In addition, the new file takes only Haeder the old file.
In the TF7000 and TF7700 HDPVR HCSI also be produced, the control files, that can also be brought to these recordings STRANGE Topfield. We were able to users at exactly these two devices testing.
But there is a problem in the Tonspurauswahl and the acquisition of EPG data. This is also the reason why today is not already the version 1.65 can go online. The exported movie is already running, but even so on the Topfield. Find out more on
[Only Registered Users Can See Links]
The Topfield differ and there are 3 different handling. For the other units TF7xxx class, we now have the default han that should fit in our opinion. If you have problems, please switch to HDPVR TF7000 or TF7700 HCSI and test. Should work a different setting, please inform me. I can change instantly.
New: Comag support
New: Smart Support
New: support Ferguson
These devices have a special handling in the control files and in the follow files. This led to the summary result files when exporting to the seams were aberrations. This was caused by the Haeder, which is now being considered.
IMPORTANT: For the manufacturers, there are devices that deviate from this operation. This is also evident at the light.
New: Homecast 8100 Adjustment
At some stations there was a problem with this device, if specific data were missing in the stream.
Fix: Speed has been optimized.
The output to a file has been improved. Due to more extensive procedures, but the speed of version 1.58 no longer attainable.
Have fun with HD DVR-Studio 1.64 ....
[Only Registered Users Can See Links]
DVR-Studio HD 1.64
Ger..
Thx Ralf
DVR-Studio HD 1:65
Version 1.65 (18.12.2009): (Eng)
==========================
New: Export for Topfield 7700 HSCI (EPG data will still be exported, changing tone not possible)
New: Export for Topfield 7700 HDPVR (EPG data will still be exported, changing tone not possible)
New: Export for Topfield TF6000 is copied to (Header)
New: Export for Octagon SF1018 (header is copied)
New: Traffic light system for device-Export
New: Device information collected via Support Request
New: SL100HD Comag PVR / PVR SL60HD / Smart MX04 HDCI / Smart MX04 + HD recordings are supported must be selected (device)
Mod: Speed optimizing export
Mod: Skipping headers improved
Fix: jerky recording eliminated after export
Fix: Homecast 8100 shots without PCR can be edited
Fix: Cut preview sometimes did not work
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.