Mgcamd 1.35a

[Marxel]

Mgcamd 1.35a


* Fix some EMM issues

This should now also emm on 1830, without mapping to 1801, go!

[Serjoga]

Mgcamd-v1.35a for Coolstream HD

26.01.2010

Fix some EMM issues

[Serjoga]

MGcamd 1.35a Offline-Update PB-Enigma

[Marxel]

MgCamd 1.35a Complete

Ab Gemini 3.x
Addon to / tmp / copying and manually install via Blue Panel

This is a Completversion.
This now provides as follows:

- Mgcamd 1.35a (bin)
- RonaldCS start script incl corresponding Uninstallscript
- NewCS 1.67 start script (including relevant Uninstallscript Those who do not use)
- Delscript-Complete

The Config of emus are being singled out, therefore, can / need to install it on a new installation, either create one or Manual.

This then has the advantage that it is now safe to update keys and emus without a individuellvorhandene setting will be overwritten.


Innovation:
Fix some issues EMM



MgCamd 1.35a Complete_2


Ab Gemini 3.x
Addon to / tmp / copying and manually install via Blue Panel

This is a Completversion.
This now provides as follows:

- Mgcamd 1.35a (bin)
- RonaldCS start script incl corresponding Uninstallscript
- NewCS 1.67 start script (including relevant Uninstallscript Those who do not use)
- Delscript-Complete

The Config of emus are being singled out, therefore, can / need to install it on a new installation, either create one or Manual.

This then has the advantage that it is now safe to update keys and emus without a individuellvorhandene setting will be overwritten.


Innovation:
Fix some issues EMM




MgCamd 1.35a Complete

Addon to / tmp / copying and manually install via Blue Panel

This is a Completversion.
This now provides as follows:
- Mgcamd 1.35a (bin)
- RonaldCS start script incl corresponding Uninstallscript
- NewCS 1.67 start script (including relevant Uninstallscript Those who do not use)
- Delscript-Complete

The Config of emus are being singled out, therefore, can / need to install it on a new installation, either create one or Manual.

This then has the advantage that it is now safe to update keys and emus without a individuellvorhandene setting will be overwritten.



Innovation:
Fix some issues EMM

[Serjoga]

For Triple Dragon

[aamir11+]

MGcamd 1.35a for EVOLUTION image

mgcamd_1.35+newcs_1.65

[Marxel]

MgCamd 1.35a E1 Complete

Ab Gemini 3.x
Addon to / tmp / copying and manually install via Blue Panel

This is a Completversion.
This now provides as follows:

- Mgcamd 1.35a (I) (patched)
- RonaldCS start script incl corresponding Uninstallscript
- NewCS 1.67 start script (including relevant Uninstallscript Those who do not use)
- Delscript-Complete

The Config of emus are being singled out, therefore, can / need to install it on a new installation, either create one or Manual.

This then has the advantage that it is now safe to update keys and emus without a individuellvorhandene setting will be overwritten.


Innovation:
Fix some issues EMM
No. viaccess support



MgCamd 1.35a Gemini 4.1 Complete


Ab Gemini 3.x
Addon to / tmp / copying and manually install via Blue Panel

This is a Completversion.
This now provides as follows:

- Mgcamd 1.35a (I) (patched)
- RonaldCS start script incl corresponding Uninstallscript
- NewCS 1.67 start script (including relevant Uninstallscript Those who do not use)
- Delscript-Complete

The Config of emus are being singled out, therefore, can / need to install it on a new installation, either create one or Manual.

This then has the advantage that it is now safe to update keys and emus without a individuellvorhandene setting will be overwritten.

Innovation:
Fix some issues EMM
No. Viaccess support


MgCamd 1.35a(2) Gemini 4.2 Complete


Addon to / tmp / copying and manually install via Blue Panel

This is a Completversion.
This now provides as follows:

- MGcamd 1.35 (am) (patched)
- NewCS 1.67 start script (including relevant Uninstallscript Those who do not use)
- NewCS 1.67/OSCam 0.99.4 start script including appropriate Uninstallscript (Who is not used)
- Delscript-Complete

The Config of emus are being singled out, therefore, can / need to install it on a new installation, either create one or Manual.

This then has the advantage that it is now safe to update keys and emus without a individuellvorhandene setting will be overwritten.


Innovation:
Fix some issues EMM
No. Viaccess support


Thx cepheus i-have

[morpheuss]

Mgcamd 135a + Newcs 1.67 for Punt@l Image

unzip it.
put it in /tmp
manual install

[lolazoca]

MgCamd 1.35a for Punt@l Image Enigma1

Instalation:

Unzip it and put the tar.gz file in the tmp dream

[marcel]

Mgcamd 1.35a Ecm - Info

03-05-2010

[marcel]

MgCamd 1.35a for Satonlines Images

[anonymenergie]

mgcamd1.35-client operation

31-07-2010

For AzboxHD


module.seq is is also in there Multicase MGcamd and splashing around with is disabled Multicase # before so is!

So if you have on it can remain the Multicase it.
MGcamd draw over 755 Atribut be awarded unless there openxcas.cfg 644!
Register with editor-in proton cccamd.list c-line and / or subscribe to newcamd.list n-line (note there splashing around komentar!) because there the line is not with N: it starts with CWS = ...

gracias a moppybike

[anonymenergie]

MgCamd ipk for Dream-elite VU+/Dreambox
MgCamd ipk for Dream-elite VU+/Dreambox
MgCamd ipk for Dream-elite VU+/Dreambox

[thunderstorm6]

Autokey updater for Mgcamd 1.35a patched
Mgcamd 1.35a Bulsatcom patched E1

[vidakovicd]

Mgcamd 1.35a Bulsatcom patched - Enigma2

Confirmed to be working on DM800HD running Gemini 5.1 (If I remember correctly)
Special thanks to all who tested the files.

Unfortunately it sometimes pixelates on HD channels. I believe it is a config issue.

Files and instructions attached!

PS. Next challange - OsCam and SoftCam.Key for EMU sharing support.

gracias a pinkyto0o

[kargo.25]

17/11/2010

Code:

MgCamd 1.35a r-1 for merlin exalibur image

[bozomustafa_68]

gp-cam-mgcamd_1.35a-r2_mipsel

For GP3

[kargo.25]

Ladies and gentleman, proud to present you
patched mgcamd 1.35a EMU to work with Bulsat
and SoftCam.Key on Enigma2 receivers.

Tested and working on DM800 running Gemini image.

The files was patched from pinkyto0o @ dtv-bg
For any questions you can mail me
If you redistribute the file in any way, don't delete this info.

INSTRUCTIONS:
1. Install an original version of mgcamd_1.35a on your receiver via the BluePanel
2. Replace the binary file /usr/bin/mgcamd_1.35a with the one from the archive
3. Run chmod 755 /usr/bin/mgcamd_1.35a
4. Replace the config file /usr/keys/mg_cfg with the one from the archive

Start/Restart mgcamd from Blue Panel.

NOTES: To avoid freezing and rebooting problems
you have to keep H: { 07 } setting in mg_cfg

The keys in the SoftCam.Key file must be in the following format:
I 0604 XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ;

Enjoy watching!

thank you pinkyto0o

[bozomustafa_68]

25/12/2010


gp-cam-mgcamd_1.35a-r3_mipsel

For GP3

[kargo.25]

ipk file for PLI E2

3-01-11

[bozomustafa_68]

Mgcamd 1.35a for eagle Image

[m.mohammad]

New Pli file

run fine on PLi 2.0 tested on PLi 1.0

[houarisat]

new pli file

[ich_111]

09/02/2011

Mgcamd 1.35a for Prince of Persia Image (dreambox + vuo+)

[m.mohammad]

mgcamd1.35a-r5

NOTE this is only for enigma 2 images running PLi 2.0 it will not work on PLi 1.0
modified mgcamd binary file to use libcrypto.so.0.9.8 instead of libcrypto.so.0.9.7.
Tested on latest PLI 2.0 for vu+duo install de install works fine.
On reboot mgcamd auto starts.

[ELECTRIC]

Mgcamd 1.35a for Newnigma Image E2

[embertelen]

MGcamd_CanalSat patched

108503