scam v3.51a

[Marxel]

scam v3.51a

- experimental serial reader support
- new config switch /debug/disable_pps to disable PPS for via and cryptoworks
- new config options for nagra cards without DT08
- sc_videoguard


serial port smartcard readers:

Zitat
### serial port smartcard readers
# device node
#/sc/serial/<name>/device=<string>
#<>e.g.: /dev/ttyUSB0
# type
#/sc/serial/<name>/type=<string****<><><><>[default: phoenix]
#<>valid types: mastercrd2, phoenix, smartreader+
# clock frequency in Hz
#/sc/serial/<name>/fs=<num><><><><><>[default: 3571200]
z.b.
/sc/serial/usb0/device=/dev/ttyUSB0
/sc/serial/usb0/type=smartreader+




Zitat
* D: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCC }}
*
* Compressed P and Q, DT06 with *** ID 0x0d, used to calculate N
* +++ only needed for cards without DT08 +++
* A = System Type
* B = Card Serial
* C = *** (24 bytes)
* N: { AAAA BBBBBBBB { CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCC }}
*
* RSA modulus used for session *** negotiation, equal to decrypted DT08; SK of Secondary ***
* +++ only needed for cards without DT08 +++
* A = System Type
* B = Card Serial
* C = Modulus (64 bytes)




Zitat
sc_videoguard:
* I: { AAAA BBBBBBBB { CCCCCCCC }}
*
* IRD serial number
* A = CA System ID
* B = Card Serial
* C = IRD Serial

[Marxel]

for sifteam

[kiliantv]

scam v3.51a tar file for E1 and E2

Ab Gemini 3.x

Addon nach /tmp/ kopieren und über Blue Panel manuell installieren

Neuerungen:
- experimental serial reader support
- new config switch /debug/disable_pps to disable PPS for via and cryptoworks
- new config options for nagra cards without DT08
- sc_videoguard

[Marxel]

Here again adjusted functioning ecm info.
because I only have 7000, it's only tested and for (DM500/56xx/7000) as specified in the db.

Thx huggy

[hilton]

Scam for VTi image VU+