PDA

View Full Version : Xcruiser Firmware



kaka
13-12-08, 19:39
Xcruiser Firmware

XDSR-Pro [V201] ...

kaka
10-01-09, 16:49
Xdsr Pro V2.13

kaka
15-02-09, 13:51
Software for XDSR 260 PVR
* version 2.07.0
* Fixed a video bug

JAKITAKI
10-04-09, 17:43
10.04.2009


new ver.9.91

pola0
17-05-09, 06:56
New Firmware 503

BIS
05-06-09, 06:25
Main Software XDSR350HD_PVR


XDSR 350 HD: IMPROVED Y4 COMPATIBILITY
usals and microbox some bugs fixed

TECKNI-SAT
12-06-09, 12:22
Version 2.26
1. Adjust motor sensitivity
2. Add number order with every mode.
3. Fixed bug of channel editor

pola0
27-06-09, 04:17
xdsr-pro s/w-2.28
fixed bug of sharing

BIS
02-07-09, 13:46
XDSR-pro s/w-2.29

BIS
16-07-09, 21:44
New software 9.93

BIS
17-07-09, 16:50
X-CRUISER-300_Ver_993_up-Rai-Seca1&2-Digitv AU

kaka
29-07-09, 16:59
New Firmware 514(Raduga at 75 East ABS 1)
New Settings HotBird-ASTRA
SoftCam Updated
Important Notice
Proceed to Factory Defaults After Upgrade The New Firmware
Code(0000)

maral100
04-10-09, 19:14
XDSR-RPO -30/09/9 S/W Version 2.46

eniz9
16-10-09, 14:42
new software v.2.52 for xdsr-pro

bozomustafa_68
26-11-09, 07:40
NEW SOFTWARE for XDSR-PRO



*Ver263

eniz9
29-12-09, 14:47
New Firmware 525 Irdeto 5,7 KAPPA card Supported
*DigiTV OK
*Rai OK
*Mediatech OK
*MTech ok
*TVGlobo OK
*Hustler OK
*Biss ok Full OK 29-12-09

aamir11+
05-02-10, 13:13
NEW SOFTWARE 9.94 Irdeto Kappa Card Fixed

magkas
05-02-10, 14:57
ok'''''

ertanizm35
07-03-10, 10:34
bana yardımcı olabilcek biri varmı
benim x cruiser DSR 300 uydum var.Şifre koymuştuk unuttuk kurtarma şifresi varmış bunların master şifre bi,len varsa bana yardımcı olurmu acaba

tarey888
26-04-10, 17:17
No software for latest xcruiser model ?

tarey888
28-04-10, 08:37
THERE YOU GO :wink:

tarey888
20-05-10, 13:35
hi
new software for Xcruiser XDRS 400HD

History Release Note
=========================================

-----------------------------------------------------------------------
- v1.08.22 / 2010. 05. 19 / Build Version : 3099
-----------------------------------------------------------------------

[Function added / Improved]
1. Timer conflict display correction.
2. Prevent collision between play alarm and recording.
3. In JPEG mode of playlist, you may select one file and will be able to slide(view) all the images.
4. Delete user font function added. (language menu)
5. Display as '*' for keyboard password.

[Bug fix]
1. Failure when network recording for an event with specific font.
2. REC file name set as previous event name when weekly or daily timer recording. 6 minutes buffer from the event starting time.
3. Timer reservation error.
4. Screen breaks on ORF channel.

[Revised points]
1. Channel name display in the right side of play list.
2. In quick service list, channel which is not able to modify marked with dark silver.
3. Correction in display Turkish charactor "I" in VFD.
4. Prevent dual decoding when Main/Sub are the same channel in PIP.

tarey888
20-05-10, 14:36
[Improvements]
1. Improvements against Freezing.
2. Improvements on Auto Start function.
3. Improvements on Playback function

marcel
20-08-10, 11:41
xcruiser firmware- XDSR-PRO S/W. v.2.73

there you go

Biss key Added Idman Tv on Turksat
Live Football

Download the Correct Software for your device
Do not Update your Receiver with HDMI Software if you have PVR Device

tarey888
28-08-10, 22:42
=========================================
Release Note
=========================================

-------------------------------------------------- ---------------------
- V1.08.37 / 2010. 08 . 26 / Build Version: 3534
-------------------------------------------------- ---------------------

1. Hang-up during long time recording - Fixed
2 . Hang-up during receiving EPG data - Fixed
3 . H / V control problem in Blind Scan - Fixed
4 . Missing some TP in Auto Scan - Fixed
5 . German language error - Fixed
6 . Alarm message appears if storage capacity is not enough for the recording - Improved
7 . Playback problem of Radio channel recordings - Fixed
8. Resolution problem at Zapping Mode Freeze and Resolution Auto mode - Fixed
9 . PMT File Update / Delete error - Fixed
10 . Hang-up in playback multifeed service recording - Fixed
11 . Unicable function - Improved
12 . Video error at the beginning of PIP - Fixed
13 . Incorrect PMT data filtering - Fixed
14 . Incorrect time information during EPG Event Search - Fixed
15 . Error if pressing Power button during recording - Fixed
16 . Showing current resolution when you change the resolution to above 576i in PAL TV - Improved
17 . Timeshift playback function - Improved
18 . Hang-up when recording multifeed service - Fixed
19 . Not able to change Audio track of a recording - Fixed
20 . Saveing the default (wifi-ethernet) configuration in Network Setting - Improved
21 . Time information of recordings shows the starting time of program - Modified
22 . Font download via USB (ttf file) - Improved
23 . MHW-EPG exit error - Fixed
24 . Automatic Timeshift when recording is done (stop) even though Timeshift start setting is Manual - Fixed
25 . Error in front LED of 430mm twin tunner model - Fixed



Click Here to Download (http://www.4shared.com/file/cL3xigLC/XDSR400HDv108372010Aug26.html)

tarey888
28-08-10, 23:05
Follow the process as described below;

<Plugin downloading>
* This plugin (plugin_27AUG2010) can be working only with IRD version s/w v.1.08.37 or later.
So, you need to download the IRD v.1.08.37 version s/w before downloading plugin.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the PVR during Live Watching.
4. When download pop-up window appears, please find "plugin" folder with Right/Left button of RCU.
5. Download the "plugin" to the PVR.
6. Download completes, the PVR will be rebooted automatically.

<plugin Menu>
Go to Menu > Utilities > PlugIn, you can see the menu as below;
1. MCAS: you can set the State of Mcas "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto" and set State to "started", MCAS will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.

2. Keditor: you can edit key.

3. Xcamclient: you can set the State of C/S "started/null", and set Start Type "Manual/Auto".
If you set Start Type to "Auto"and set State to "started", C/S will start automatically when the PVR turns on.
If you set Start Type to "Manual", you can start/stop it manually in that menu.

4. XcamConfigure: you can input and edit c/s information.
Once you input server URL, it will be displayed as ***** for protection, and you can see it by pressing 1407.

5. ExSIM: You can connect external modules which is using twin protocol, Y4, KNJ... (start > OK button > Set the module)
Satellite module "A" is for twin protocol and Satellite module "B" is for Y4.
Ethernet module is for KNJ.

6. Kain2r: This is s/w module for KNJ, you can use it just like cc***.
1. Select Kain2r.
2. Start it with Green button.
3. After Started, press OK button.
4. Pop-up menu will appear.
5. Select <registration> at the bottom of the Pop-up menu.
6. Select Server Address and press 1407.
7. Input www.dragonlink.biz and press enter in the on-screen keyboard.
8. Go to Registration Key and input 25digit key, and press enter in the on-screen keyboard.
9. Status: "Connecting > Conneted to the server / expire date" will be shown.
10. Go to the live channel (pls. refer to the channel list)
The key is safe even after factory reset, and one 25digit key can be used in only one PVR.

** From this plugin_27AUG2010, you don't need to stop other menus to use a specific one.
(For example, you can keep started for Mcas during using Xcamclient)

------------------------

<Home Network Sharing>
You can use Home Network Sharing from this plugin with Mcas and Mclient.
Both Server and Client receiver need to be connected by internet.
Server receiver and client receiver have to have the same Gate way address to share card key data within Home Network.

Mcas - server side
1. make started by Green button and then press OK button
2. you will see ¡®smart card 2¡¯ and ¡®server setting¡¯ menu if your receiver has smart card inside
3. enter ¡®server setting¡¯ menu by press OK
4.¡®port¡¯ : don¡¯t need to change port and it is better to leave as default, but you can change it as 5 digits if you need and it is safe.
5.¡®user setting¡¯ : you can input user id and password to allow connecting to server receiver from client which is listed inside user setting menu.
6.¡®auto start¡¯ : you can change as ¡®on¡¯ if you want to start this server menu when you start Mcas plugin
7. login confirmation : you can change as ¡®on¡¯ if you want to check user id and password from client receiver

Mclient - client side
1. make started by Green button and then press OK button
2. there is a input space for server address (IP address of server receiver), port, user id, password
3. To edit server address, you need to press your own master key (1407 if there is no change) then input the IP address of server receiver (no need //)
4. lastly, go to the ¡®connect to server¡¯ and press ¡®OK¡¯ button



Bis AB-SAT On Hotbird Working Cheers :drinks:

tarey888
30-08-10, 17:03
Software For XCRUISER XDSR PRO

IKS2 Auto Start

TiestoSat
30-09-10, 21:22
30-09-2010

NEW SOFTWARE FOR XCRUISER XDSR270PVR AND XDSR270PVR PLUS

ver:1.18.58 :good:

TiestoSat
02-10-10, 09:30
new Software For Xcruiser XDSR 250pvr

osamahanna
09-10-10, 13:41
I have DU as internet service provider and I am using xd400 but it is not working. It used to work fine even with much lower speed than what I have now.

The person who installed the reciever is unable to fix it and I tried to reinstall the software. Do I need a new sharing provider or what do I need to do.

bennyellada
18-10-10, 16:27
people ..
im sorry if i post this at the wrong place
may i ask something?
What do you guys know about onchannel? Becouse it doesnt work anymore !?
please help greetings from holland!

tarey888
21-10-10, 23:42
people ..
im sorry if i post this at the wrong place
may i ask something?
What do you guys know about onchannel? Becouse it doesnt work anymore !?
please help greetings from holland!

Onchannel is stop permanently forget it :mixed-smiley-030:

New Software for XDSR Pro :- Twin protocol & Language ARABIC & FARSI Added

To Use Dongle Press Menu > Security Setup > Current Password 3333 if you see Activated Down left Side on your TV Screen it means it's ready to Decode Channel

aamir11+
24-10-10, 15:45
Software for XDSR PRO 2.76 twin Protocol Added for Sat Sharing + Arabic & Persian Language Added

Menu > STB Security > Password 3333 Must be Activated

uterator
30-05-11, 06:41
Follow the process as described below;

<Plugin downloading>
* This plugin (plugin_27AUG2010) can be working only with IRD version s/w v.1.08.37 or later.
So, you need to download the IRD v.1.08.37 version s/w before downloading plugin.
1. Unzip plugin_ddmmmyyyy.zip.
2. Copy "plugin" folder to a USB storage.
The folder name should be "plugin" without change, otherwise the PVR cannot recognize it.
3. Connect the USB storage to the PVR during Live Watching.
4. When download pop-up window appears, please find "plugin" folder with Right/Left button of RCU.
5. Download the "plugin" to the PVR.
...

this is very useful thing, but it's only for 400HD.
Did we have such kind of plugins for XDSR PRO also? I want to add russian fonts and set Newcamd connection type to Auto Start.

tarey888
30-05-11, 08:39
this is very useful thing, but it's only for 400HD.
Did we have such kind of plugins for XDSR PRO also? I want to add russian fonts and set Newcamd connection type to Auto Start.

Next version of XDSR pro will connect Newcamd Automatically
Installing Fonts is not possible in XDSR Pro

uterator
30-05-11, 19:25
Next version of XDSR pro will connect Newcamd Automatically
Installing Fonts is not possible in XDSR Pro
tarey, I want to explain what I meant about russian fonts, the main thing is that all russian channels are unreadable, as the channel list font doesn't support russian characters and the user can't find current channel from listed names. This is a little enhancement from usability part.
Also, there is another enhancement which is more important in my view. There is no russian setting in audio language configuration list, so if the channel language is set to russian from OPT->Audio Language, then if reset the power of receiver it switches to 'en', it didn't saves last choice. So, could there be added russian option in Audio Language Configuration? or could be there some ability to save last language set.
thanks,
uterator

tarey888
31-05-11, 06:18
hi

thanks for the explanation
would you please upload a proper Russian fonts ?
Audio Settings save will be done !!

uterator
31-05-11, 07:16
Hi tarey

Please, find attached fonts from standard windows font library which contains russian characters. They are: Arial, Times New Roman, Sylfaen, Tahoma.
If you wish I can test some unreleased version. Please, feel free to communicate with me.

I couldn't upload the file, here is the path
dl.dropbox.com/u/20489538/Russ_fonts.rar (3.9 MB)

Thanks

tarey888
01-06-11, 13:09
hi

dear can you please post a picture of Russian Channel Name which does not Support by XDSR Pro

and Post Menu Screen Shots with mark on Language Errors

Thanks

uterator
02-06-11, 18:51
this snapshot with russian letters is taken from other receiver
http://postimage.org/image/1jptxxnes (Pic 1 in attachments)

this is we seeing now on 2.77
http://postimage.org/image/1jpx90cec (Pic 2 in attachments)

channels on pictures are not the same, but they are taken from "Eutelsat W4"'s channels list.

Best Regards

uterator
06-06-11, 09:26
Hi tarey, when we can test the new version?

tarey888
06-06-11, 09:36
Problems and Request Reported waiting for the Results Soon you can Get it

uterator
11-06-11, 19:43
Hi tarey, I found some new issue at using NewCamd connection. The case is when the receiver using newcamd so sometimes it fails to accept codes from server and the picture hangs. I think this could happen when the Ethernet connection drops at the moment. Anyway, I am waiting and nothing gets happen. So I em opening Connection page (F2) and seeing there that connection status is "Connecting..." and it hanged on that and never reconnects by itself. To get back connection I am only restarting connection by pressing GREEN 2 times.
I'm seeing 2 solutions for this case:
1. This is a minor bug in functionality, server is working but receiver hanged on "Connecting..." status, it could be fixed.
2. Or could be added check for connection so if it hanged on "Connecting..." status during 30s, the receiver can just restart it's connection.

Could you please add this requirement also for new version, or if it will tack from you much time, please, let me now how to do it and I will do it myself.

Thanks
With Best Regards

uterator
11-06-11, 19:58
Excuse me, I forgot to mention about other little 'think' of connection.
When switching power on and receiver completes booting, I am starting newcamd connection, but the channel translation didn't starts, so I should change the channel by up/down to start seeing translation, for example receiver booted on channel 5, then I started connection (connects correctly), after that I should change channel to 6, then return back to 5 to see what is in ch5.
I don't think that it is necessary to change the channel for starting receiver work.
So ..... you already know ..... ;)

thanks again
Bye

tarey888
13-06-11, 08:17
Channel Translation ??

you mean EPG information ? or Channel Name ?

uterator
13-06-11, 10:24
I mean the TV programs of that current channel (audio video signal).

uterator
06-07-11, 06:57
Hi guys,
Is there any news regarding new firmware?

uterator
16-08-11, 11:23
Hi tarey888,

Do we have something from PRO series firmware?
Problems still actual for us, we are facing problems with them.

Thanks

murat
06-09-11, 14:31
how to add or edit key Biss key on X-cruiser xdsr270pvr plur

lemchahebi
20-03-12, 15:03
Bonjour! voila je cherche une mise a jour pour mon recepteur Mvision HD 200 qui le fait marché avec un dongle externe comme y6,morbox,ou Microbox merci

42d3e78f26a4b20d412==